1 Answer. Yes, all conductors protected by a 20 ampere circuit breaker must be at least 12 AWG copper.

## How far can you run 12 gauge wire on a 20 amp circuit?

After these distances, the circuit will go over the recommended 3% voltage drop. You can run a 12 gauge wire up to 70 feet on a 15 amp circuit. That number drops to 50 feet if you run 12 gauge wire on a 20 amp circuit.

## Can 12 gauge wire handle 20 amps?

12-gauge wire is the next size larger and is allowed to carry up to 20 amps.

## Can I mix 12 and 14 gauge wire on a 20 amp circuit?

Yes, you can use 12 gauge wire on a 15 amp circuit. However, one should never put a 14 gauge wire on a 20 amp circuit, as the wires will melt and cause fire before ever tripping the breaker. Also, keep in mind that a 14 gauge wire is a bit better since it’s thinner and lighter than 12 gauge.

## What size wire should I use for 20 amp breaker?

Why Wire Gauge Is Important

Wire Use | Rated Ampacity | Wire Gauge |
---|---|---|

Low-voltage lighting and lamp cords | 10 amps | 18-gauge |

Extension cords (light-duty) | 13 amps | 16-gauge |

Light fixtures, lamps, lighting circuits | 15 amps | 14-gauge |

Kitchen, bathroom, and outdoor receptacles (outlets); 120-volt air conditioners | 20 amps | 12-gauge |

## How many outlets can I put on a 20 amp breaker?

One rule of thumb is to assign a maximum draw of 1.5 amps to each receptacle, which allows for 10 receptacles on a 20-amp circuit.

## How far can you run 14-gauge wire on a 20 amp circuit?

You can not use 14 AWG anywhere on a circuit that has a 20A breaker. If you are putting 15 amp receptacles on a 20 amp circuit with 12 gauge wire, then you MUST use the screw terminals, not the back stab terminals.

## Can 14 gauge wire handle a 20 amp breaker?

So yes, a 14 gauge wire will safely carry 20 amps, no problem. It won’t violate the laws of physics, it isn’t a fire hazard, there’s no problem, it’s done all the time in electrical equipment without any trouble. Here’s how you get in *HUGE* trouble with 14 gauge wire on a 20 amp breaker in home or commercial wiring.

## Is it OK to use 12 gauge wire on a 15 amp circuit?

Because it has even less chance of overheating, 12-gauge wire is also acceptable on a 15-amp circuit.

## Can 12 gauge wire handle 30 amps?

Can I use a 12 gauge wire on a 30 amp circuit? – Quora. No. 12 gauge wire is rated for a maximum of 20 amps. You need a minimum of 10AWG wire for 30 amps.

## Should I use 12 or 14 gauge wire?

If you’re wiring a circuit on which there are both lights and outlets, or you just aren’t sure which wire gauge to use, you can’t go wrong by choosing a 12-gauge wire. It’s not quite as flexible as a 14-gauge wire, and it costs a bit more, but it’s always a safe choice on a 15- or 20-amp circuit.

## How far can you run 12 gauge wire on a 15 amp circuit?

A 12 gauge wire is typically good for 15 amp at 100 feet.

## Can 14 2 wire be used for outlets?

You can use 14-2 wire to 12 outlets that are protected by a 15 Amp breaker. If you use 12-2 you can use a t-rated 20 Amp receptacle, but in my code you only see those in kitchens.

## What size wire should I use for a 15 amp breaker?

For a 15-Amp circuit use #14 copper wire (or #12 copper-clad aluminum wire). The fuse or circuit breaker feeding this circuit is rated for 15 amps.

## Can you use 10 gauge wire on a 20 amp breaker?

2 Answers. Yes, you can use 10 AWG copper conductors with a 20 ampere breaker. The smallest size conductors you could use with a 20 ampere breaker, are 12 AWG copper conductors.

## How many amps can 12 gauge wire handle?

Size & AMP Ratings

NM, TW, & UF WIRE (Copper Conductor) | SE CABLE (Copper Conductor) |
---|---|

12 AWG – 20 AMPS | 6 AWG – 65 AMPS |

10 AWG – 30 AMPS | 4 AWG – 85 AMPS |

8 AWG – 40 AMPS | 2 AWG – 115 AMPS |

6 AWG – 55 AMPS | 1 AWG – 130 AMPS |