Best answer: Will a Mossberg 500 stock fit on a shockwave?

An antique Mossberg 500 buttstock fit my 590 Shockwave perfectly.

Can you put a regular stock on a Mossberg Shockwave?

The Mossberg 590 Shockwave has a 14-inch barrel and with the Shockwave Raptor grip is over 26 inches long. … If you put a stock on it with an 18-inch barrel you are also still legal, however, it cannot go back to its firearm configuration.

Are all Mossberg 500 stocks interchangeable?

Answer: Mossberg Maverick 88, 500, and 590 models are all interchangeable with each other.

Are Mossberg 500 and 590 parts interchangeable?

The 500 and the 590 are the same basic design. That just means the parts work together in the same way but may not interchange because some of them are slightly different sizes or different materials.

Can you put a Mossberg 500 barrel on a 590?

Your 590 barrel probably does not screw into the top of the magazine so it will probably not be compatible with standard 500 barrels. If your barrel slides over the magazine and then you lock it down with an endcap (and I suspect it does), then you’ll need to get a new mag tube and spring for your 500 barrel.

IT IS INTERESTING:  Were bolt action rifles used in the Old West?

The Mossberg Shockwave

Short barreled shotguns without shoulder stocks and less than 26 inches in length are regulated under the NFA because they are easily concealed, and were favored by criminals at the time of the law’s passage. The product debuted to press explaining that yes, it is indeed legal.

Therefore, under the new Texas rules, the Mossberg Shockwave is exempt from section 46.05 and is now legal in Texas. So there you have it. The Mossberg Shockwave is a legal firearm in Texas.

Can I change stock on Mossberg 500?

The Mossberg 500 shotgun is one of the most popular security/tactical shotguns in use today. … You can quickly remove the stock on a Mossberg 500 to either reconfigure the shotgun or to simply change the stock. Pistol grips are also available for the Mossberg 500.

Will a 12 gauge Mossberg 500 stock fit a 20 gauge?

As for stocks, 12 gauge stocks WILL fit the 20 gauge, although you may have a bit of a lip where they come together. As in, the stock may hang over 1/16 to 1/8th of an inch around the receiver.

What is the difference between a Mossberg 500 and 500A?

There is no difference between a Mossberg 500 and 500A. Mossberg changes the names to “Keep it fresh” The 500, 500A, 600, 600A, 600AT, Persuader, Cruiser, 590, 590A1, and Maverick 88 all use the same alloy receiver. Differences in safety location, finish, stocks and other cosmetics account for the different names.

IT IS INTERESTING:  Can u put pistol grip on shotgun?

Why did Mossberg discontinue the 535?

The 525 is a 3.5″ receiver with a standard 12 ga barrel. A far better choice would be a Mossberg 835 with the overbore barrel. It gives much better patterns, which is why the 535 has been discontinued.

What is the difference between a Mossberg 500 and Maverick 88?

Maverick 88 shotguns feature a trigger guard-mounted cross-bolt safety as opposed to a top tang safety, which is used on the Mossberg 500 series. … Maverick 88s are factory finished with steel bluing only, whereas Mossberg 500s have factory-blued, nickel-plated or parkerized (barrel/magazine) options.

Can you put a 590A1 barrel on a 500?

Barrels from a standard 500 won’t work because it has a different mag tube setup. My Mossy ATP-6 (500, 5+1 capacity) and ATP-8 (500, 7+1) have different thread pitches where the magazine tube threads into the receiver. The 8’s threads are coarser and made to be removed by hand.

Can you put a 590A1 barrel on a 590?

MAKster Member. The 590 and 590A1 are identical other than the thicker barrel, metal trigger guard and safety. The Barrels are interchangeable.

Can a Mossberg 500 use a magazine?

The standard Mossberg 500 has a magazine tube that holds five rounds in the tube and one in the chamber. … That is a total of 6 rounds. Due to the design of the Mossberg 500, you cannot add a magazine extension tube.

Are Mossberg shotgun barrels interchangeable?

All the solids are interchangeable within their capacities and all the cap tubes are interchangeable within their capacities. You can use a basic 500 solid screw mag tube on the Mav 88, the 500, the 5+1 Persuader etc. You can use the 835 cap tube mag and barrels on the 835, the 5+1 590a1, the 5+1 capped Cruiser etc.

IT IS INTERESTING:  Is Norma MHP good ammo?
Blog about weapons